Like us on Facebook

1983 NW 45th Street/ Fort Lauderdale

Phone: 954-295-5620 • 561-702-5452

Info@bristolpoolandspa.net

1983 NW 45th Street/ Fort Lauderdale

Phone: 954-295-5620 • 561-702-5452

Info@bristolpoolandspa.net

Bristol Pool & Spa© 2013

Filters

Search

By removing impurities such as dirt, leaves, grass, hair, body oils, sunscreen, and even many bacteria from the water, high efficiency filters keep pool water clean, clear and inviting. Choose from three different filter technologies—cartridge, D.E. or sand.

Pool Filters by Jandy - DE, Cartridge and Sand

The Jandy System offers filters to keep your pool and spa water refreshingly clean. Jandy filters are loaded with features to provide sparkling clear water with minimal maintenance.

Pentair High efficiency filtration systems

By removing impurities such as dirt, leaves, grass, hair, body oils, sunscreen, and even many bacteria from the water, our high efficiency filters keep pool water clean, clear and inviting. Choose from three different filter technologies—cartridge, D.E. or sand.

Hayward In Ground Pool Filters

Cartridge Filter

Cartridge filters have a greater surface area than sand allowing for fewer clogs and easier maintenance. They run at lower pressure than sand which puts less backpressure on the pump, providing more flow and turnover. Cartridge filters should be cleaned once or twice a season by simply hosing the cartridge element off. Cartridge element filters trap debris as small as 10 to 15 microns.

D.E. Filters

Diatomaceous earth (D.E.) is mined and is the fossilized exoskeletons of tiny diatoms. They are used to coat "grids" in the filter housing and act as tiny sieves allowing for the removal of debris as small as 5 microns. Once the pressure rises, the filter is backwashed just like a sand filter and then "recharged" with more D.E. powder. D.E. filters trap debris as small as 2 - 5 microns.

Sand Filters

In this method, impurities are extracted from the water using sand to collect and attract the debris as small as 20 to 40 microns. Sand filters must be backwashed (running it in reverse) to unload the water waste.